Quick Specs See our showcase of completed projects

Ask us a Question

verification code

 

Quick specs

AQURON WAREHOUSE SYSTEM - 2 step system Application

 

 

 

AQURON WAREHOUSE SYSTEM is a 2 Step System Application

STEP 1: Penetrating Concrete Sealer

AQURON 1000 AVAILABLE AS A QUALITY CONTROLLED, SUPPLY & APPLY APPLICATION

Once power trowelling has been completed to produce a dense, burnished finish, AQURON 1000 is spray applied to the surface. AQURON 1000 transforms the moisture within the slab into a gel which fills the porosities of the concrete matrix.
 
AQURON 1000 provides complete curing assistance, to produce a light coloured concrete with anti-dusting properties and a hardened surface which develops a sheen with regular cleaning and use. AQURON 1000 hardens the both the surface and matrix of the concrete due to its ultra deep penetrating ability. This eliminates the formation of a surface crust which has a tendency to craze and delaminate.

NOTES

  • AQURON 1000 can be applied to existing concrete provided the surface is clean and
    free from contamination and previous coatings. If applied to concrete older than 24
    hours, AQURON 1000 does not off er the benefits of curing assistance.
  • Slip resistance and slip coefficent of friction remains unchanged by AQURON
    1000 application. If increased slip coeffi cient is required we recommend applying
    CRETEPOLISH MAX. Be aware that oil, mud, and other similar materials on a smooth surface can be a potential hazard and good drainage and house keeping is therefore imperative.
  • AQURON 1000 is not formulated to be used to control moisture vapour emissions
    beneath floor coverings or coatings, or to withstand hydrostatic vapour/moisture
    pressure. In these situations use AQURON 2000.

STEP 2: Sheen Enhancement & Stain Resistance

Should your concrete surface require immediate sheen enhancement, the surface is wet scrubbed and depending on the surface finish or porosity, a light application of CRETEPOLISH MAX may be applied.

CRETEPOLISH MAX is a new generation, water-based, metal crosslinked, synthetic polymer polish which provides immediate initial sheen enhancement and stain resistance for AQURON treated surfaces.

CRETEPOLISH MAX has an integral stain blocking additive which provides stain resistance against most common stain-causing agents. It is designed for use on interior diamond honed or powertrowelled finished floor surfaces where sheen enhancement and stain resistance is desired e.g. wholesale and retail warehouse floors which require an easy to-clean, stain resistant floor.

NOTES

  • CRETEPOLISH MAX can also be applied to acrylic, epoxy and polyurethane coated floors to increase or restore sheen. Always treat a small trial area first to ensure compatibility.
  • To retain stain resistance, CRETEPOLISH MAX should be regularly reapplied by mopping as a part of the cleaning program

Click to go to downloadable AQURON SPECIFICATIONS

 

2014 - Download info on AQURON 1000 ULTIMATE Treatment for curing & extending life of Concrete slabs

2014 Download AQURON 1000 tech sheet now:

Download AQURON CURING vs WATERCURING now:

 

Markham

Australia
1800 693 694 (+617 4153 6286)
Email sales@aquron.com.au

 

 

© Copyright 2012 Markham Global Ltd. All rights reserved

Terms & Conditions   |   Sitemap   |   Design by Dynamic Multi Media   |   Administrator Login